|
Froth-Pak®
EPS | STYROFOAM |
FROTH PAK | POLYISOCYANURATE | FIBERGLASS
FROTH-PAK is a two-component polyurethane spray foam
that comes in both portable kits and refillable tanks.
It is available in multiple densities and is ideal as an
insulator or air-sealant.
 FROTH-PAK can be used to fill cavities, wall and floor
penetrations, cracks and expansion joints, cold storage
facilities and refrigerated trailers.
FROTH-PAK can also be used to repair spray-applied polyurethane
roofs (2.75# density) or damaged insulation boards. It
is ideal for filling pitch pockets, low ponding water areas
on roof decks and fabricating on-site cant strips.
FROTH-PAK bonds to most construction materials including
lumber, plywood, particleboard, foamboard, masonry, metals,
drywall, concrete and foam panels.
FROTH-PAK consists of two main intermediate
components — Polyol
(A) and Isocyanate (B) — that are mixed together to
form polyurethane foam. Both “A” and “B” tanks
are pressurized. The hose assembly (which is attached to
the gun applicator) includes two hose lines; one is connected
to the "A" tank and one is connected to the "B" tank.
- When the tanks are turned on, the system becomes pressurized.
- An impingement type mixer/spray nozzle is inserted
into the face of the gun.
- When the trigger is pulled the two chemicals mix together
in the nozzle and then spray out to produce foam that expands
3 to 5 times.
- FROTH-PAK will skin over in 30-40 seconds and be completely
cured in under one minute.
| Typical
FROTH-PAK Applications |
| Agriculture |
| • |
Grain Storage Bin Sealant |
| • |
Silo Sealant |
| • |
Light Control in Chicken Houses |
|
| Cold
Storage |
| • |
Floor Seams |
| • |
Fluted Roof Decks |
| • |
Walls/Wall Repair |
|
| HVAC |
| • |
HVAC Duct Sealant |
| • |
Geothermal Pipe Insulator |
|
| Plumbing |
| • |
Structural Support |
| • |
Around Copper or PVC Lines |
| • |
Stabilizing Pipe Insulation |
|
| Pool & Spa |
| • |
Sound Dampening |
| • |
Insulation/Insulation Repair |
|
| Theatrical |
| • |
Stage & Movie Sets |
| • |
Floats |
| • |
Special Effects |
|
| Roofing |
| • |
Filling Pitch Pockets |
| • |
Air-sealing Roof/Walls Joints |
| • |
Air-seal around HVAC Penetrations |
| • |
Fabricate On-site Cant Strips |
| • |
Level Low Ponding Water Areas
on Roof Deck |
| • |
Repair Spray-applied Polyurethane
Roofs (2.75# density) |
|
| Transportation
Vehicles |
| • |
Insulation |
| • |
Sound Dampening |
| • |
Structural Support |
| • |
Vibration Control |
| • |
Sealing – Air, Water,
Dust |
| • |
Surface Protection |
| • |
Flotation |
|
|
FROTH-PAK can be used in either interior or exterior industrial,
commercial, institutional and residential settings. If
used in an exterior setting, a coating must be applied
for UV protection.
|
